Sealing A Garage Floor

The floor of your garage is exposed to intense corrosion and deterioration due to road grime, oils and other auto fluids. Sealing your garage floor reduces dust and makes cleaning and sweeping easier plus of course, keeps your garage looking neat and tidy.


Whilst an epoxy flooring coating is considered to be the ideal flooring solution, a clear acrylic concrete sealer protects the concrete from damage and stains. The same sealers can also be used on concrete walks and driveways or as a primer under acrylic or polyurethane floor paints.

You should take care when and where you apply a sealer because in most instances, they cannot be applied over paint or other coatings.

In order to do the sealing yourself you need several materials and tools:

  • protective clothing, neoprene rubber gloves, goggles,
  • a stiff brush and a bucket, a paintbrush,
  • a cartridge-style respirator with organic-vapor and small-particle filters,
  • paint roller with extension handle and tray, medium nap roller cover,
  • a good quality concrete degreaser
  • and of course some concrete sealer.
  • Usually ½ gallon of sealer is used for approximately 100 square feet.


Before beginning the sealing process you have to thoroughly clean the floor because it has to be free of dirt, grease and oil. To do this you should use a stiff scrub brush to apply the cleaner and concrete degreaser according to the instructions. Allow the solution to lay on the floor for 15 to 20 minutes more for stubborn stains after scrubbing. After this you should rinse thoroughly with clear water. You may need several applications.

Many concrete sealers contain hazardous chemicals that may be harmful to skin and eyes and the vapors are not safe to breathe but the vast majority are acrylic with lesser harmful elements. The best way to avoid damages to your skin, eyes and lungs is to wear the protective equipment made of neoprene such as rubber gloves, goggles and a respirator with both organic-vapor and solid-particle filter cartridges. During the process of sealing the floor you should continuously ventilate the garage by opening all doors and windows together with also using a fan would be a great idea.

After cleaning and drying the concrete floor, the sealer has to be applied. The sealer should be tested in an inconspicuous area before applying.

Some uneven density in the concrete may result in light/dark appearance that may be objectionable. If this is a problem, it is advisable to grind or sand the floor before applying sealers of any kind.

By using the medium-nap paint roller with extension handle is the easiest way to apply the sealer. Start in a rear corner continuing to work your way out of the garage. Before doing anything else you should allow the sealer to dry as indicated on the sealer bottle, usually for a few hours.

For a driveway the procedure is essentially the same but it would be quicker to use a garden sprayer to apply the sealer to a large driveway. At all times you should act with caution not to over spray on other material or plant life due to the high risk of staining.

© Powered by The Web Team Sitemap